4x4
Ford
FORD-69
Type:

Ranger

Model:

PX / T6 MK1 & 2

Year:

08/2011 to Mid 06/2018

Detail:

75mm Lift (3"),
4x4 Chassis Mounted Front Bump Stop Models Only, 
Also Suits 4x2 Highrider

WARNING - 50MM (2”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
  • Refer to Local Laws before Fitting to Registered/Road Vehicles
  • An Engineering Certificate may be required
  • Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
 
  • Adjustable Panhard Rods
  • Modified Leading / Trailing Arms
  • Brake Hoses
  • Extended Bump Stops
  • Gear Box & Drive Line Modifications
  • Steering Arms
  • Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only
Front QTY Part
Number
Price
Coil Spring

All 2.2L Engines &
4x2 Highrider



Linear Rate
Raised Height (3” Lift)

C19-442

Availability

R
P.O.A.

All 3.2L Engine 4x4s

Linear Rate
Raised Height (3” Lift)

C19-458

Availability

R
P.O.A.

Linear Rate
Raised Height (3” Lift)
50-100Kg

C19-476

Availability

R
P.O.A.
1
Shock Absorber

Twin Tube Nitro-Gas

GS19-092

Availability

R
P.O.A.

IFP Monotube Shock
Adjustable Spring Seat Height
X = 190mm / 7.48”

IMS19-50092

Availability

R
P.O.A.

X - Centre of Eye to Spring Seat

Monotube Remote Reservoir
(3-Way Adjustable)
Adjustable Spring Seat Height
X = 190mm / 7.48”

MRA19-A092

Availability

R
P.O.A.

X - Centre of Eye to Spring Seat

Shock Absorber Bracket
 

Recommended For Optimal Remote Reservoir Positioning And Fitment

RM19-002

Availability

R
P.O.A.

Only For Use With MR19-50092

Bump Stop
 

Replacement Bump Stop
Progressive Adjustable 0‑25mm Extension

BS59-560

Availability

R
P.O.A.

Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.

Control Arm

Upper Control Arm

(Pair) 3º Castor Built In
Rubber Bushes
Ball Joint Not Included

UCA19-004K

Availability

R
P.O.A.

Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment

Strut Top Cap

Strut Top Cap

SC19-009

Availability

R
P.O.A.
Rear QTY Part
Number
Price
Leaf Spring

3 + 3 Leaves
Medium Duty
Raised Height (40mm Lift)
Up to 100Kg Constant Load

L19-131-R

Availability

R
P.O.A.

3 + 1 Leaves (Parabolic)
Raised Height (60mm Lift)

L19-135-RP

Availability

R
P.O.A.

3 + 1 Leaves (Parabolic)
Raised Height (3” Lift)

L19-139-RP

Availability

R
P.O.A.
Shock Absorber

Twin Tube Nitro-Gas

GS19-081T

Availability

R
P.O.A.

IFP Monotube Shock

IMS19-50081T

Availability

R
P.O.A.

Monotube Remote Reservoir
(3-Way Adjustable)

MRA19-A081T

Availability

R
P.O.A.
Spring & Shackle Bush Kit

Kit Contains:
2 x PB19-1523
4 x PB19-1524
4 x PB19-1525

PB19-1104K

Availability

R
P.O.A.
U-Bolt Kit

Kit Contains:
2 x UB21-466

UB21-466K

Availability

R
P.O.A.
Shackle Kit

Greasable: Fit in Pairs

SK19-058

Availability

R
P.O.A.
Shackle Pin

Greasable: Fit in Pairs

SP59-060

Availability

R
P.O.A.
Tailshaft Spacer Kit
 

Tailshaft Centre Bearing Spacer Kit

WA19-526K

Availability

R
P.O.A.

Helps to Reduce Driveline Vibration in Lifted Vehicles