4x4 Suspension
Ford
FORD-69
Download Catalogue Page
Type:

Ranger

Model:

PX / T6 MK1 & 2

Year:

08/2011 to Mid 06/2018

Detail:

75mm Lift (3"),
4x4 Chassis Mounted Front Bump Stop Models Only, 
Also Suits 4x2 Highrider

WARNING - 50MM (2”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
  • Refer to Local Laws before Fitting to Registered/Road Vehicles
  • An Engineering Certificate may be required
  • Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
 
  • Adjustable Panhard Rods
  • Modified Leading / Trailing Arms
  • Brake Hoses
  • Extended Bump Stops
  • Gear Box & Drive Line Modifications
  • Steering Arms
  • Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only
Description
Part
Number
QTY
Price
Coil Spring

All 2.2L Engines &
4x2 Highrider



Linear Rate
Raised Height (3” Lift)
C19-442
Availability
R
$270.00

All 3.2L Engine 4x4s

Linear Rate
Raised Height (3” Lift)
C19-458
Availability
R
$270.00

Linear Rate
Raised Height (3” Lift)
50-100Kg
C19-476
Availability
R
$270.00
Shock Absorber

Twin Tube Nitro-Gas
GS19-092
Availability
R
$203.01

IFP Monotube Shock
Adjustable Spring Seat Height
X = 190mm / 7.48”

X - Centre of Eye to Spring Seat

X - Centre of Eye to Spring Seat Private

IMS19-50092
Availability
R
$275.00

Monotube Remote Reservoir
(3-Way Adjustable)
Adjustable Spring Seat Height
X = 190mm / 7.48”

X - Centre of Eye to Spring Seat

MRA19-A092
Availability
R
$519.00
Shock Absorber Bracket

Recommended For Optimal Remote Reservoir Positioning And Fitment

Only For Use With MR19-50092

RM19-002
Availability
R
$90.00
Bump Stop

Replacement Bump Stop
Progressive Adjustable 0‑25mm Extension

Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.

BS59-560
Availability
R
$50.00
Control Arm

Upper Control Arm

(Pair) 3º Castor Built In
Rubber Bushes
Ball Joint Not Included

Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment

UCA19-004K
Availability
R
$693.00
Strut Top Cap

Strut Top Cap
SC19-009
Availability
R
$66.00
Description
Part
Number
QTY
Price
Leaf Spring

3 + 3 Leaves
Medium Duty
Raised Height (40mm Lift)
Up to 100Kg Constant Load
L19-131-R
Availability
R
$304.00

3 + 1 Leaves (Parabolic)
Raised Height (60mm Lift)
L19-135-RP
Availability
R
$332.00

3 + 1 Leaves (Parabolic)
Raised Height (3” Lift)
L19-139-RP
Availability
R
$332.00
Shock Absorber

Twin Tube Nitro-Gas
GS19-081T
Availability
R
$172.00

IFP Monotube Shock
IMS19-50081T
Availability
R
$250.00

Monotube Remote Reservoir
(3-Way Adjustable)
MRA19-A081T
Availability
R
$489.01
Spring & Shackle Bush Kit

Kit Contains:
2 x PB19-1523
4 x PB19-1524
4 x PB19-1525
PB19-1104K
Availability
R
$86.00
U-Bolt Kit

Kit Contains:
2 x UB21-466
UB21-466K
Availability
R
$50.00
Shackle Kit

Greasable: Fit in Pairs
SK19-058
Availability
R
$54.57
Shackle Pin

Greasable: Fit in Pairs
SP59-060
Availability
R
$22.92
Tailshaft Spacer Kit

Tailshaft Centre Bearing Spacer Kit

Helps to Reduce Driveline Vibration in Lifted Vehicles

WA19-526K
Availability
R
$26.19
Please choose from the 'Front' and 'Rear' categories above for your vehicle.