4x4
Mazda
MAZ-55
Type:

BT-50

Model:

Series II - UP/UR

Year:

10/2011 on

Detail:

75mm (3") Lift 4x4 3.2L Pickup / Well Back / Tray Back, 
Also Suits 4x2 Highrider, 

WARNING - 75MM (3”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
  • Refer to Local Laws before Fitting to Registered/Road Vehicles
  • An Engineering Certificate may be required
  • Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
 
  • Adjustable Panhard Rods
  • Modified Leading / Trailing Arms
  • Brake Hoses
  • Extended Bump Stops
  • Gear Box & Drive Line Modifications
  • Steering Arms
  • Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only
Front QTY Part
Number
Price
Coil Spring

4x2 High Rider

Linear Rate
Raised Height (3” Lift)

C19-442

Availability

R
P.O.A.

4x4

Linear Rate
Raised Height (3” Lift)

C19-458

Availability

R
P.O.A.

Linear Rate
Raised Height (3” Lift)
50-100Kg

C19-476

Availability

R
P.O.A.
Strut Cap

Strut Top Cap

SC19-009

Availability

R
P.O.A.
Shock Absorber

Twin Tube Gas
Heavy Duty

GS19-092

Availability

R
P.O.A.

Internal Monotube
Adjustable Spring Seat
Heavy Duty
Original Setting of
X = 190mm / 7.48”

IMS19-50092

Availability

R
P.O.A.

X - Centre of Eye to Spring Seat

Monotube Remote Reservoir
Adjustable Spring Seat
Heavy Duty
Original Setting of
X = 190mm / 7.48”

MR19-50092

Availability

R
P.O.A.

X - Centre of Eye to Spring Seat

Bump Stop
 

Replacement Bump Stop
Progressive Adjustable 0-25mm Extension

BS59-560

Availability

R
P.O.A.

Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.

Shock Absorber Bracket
 

Recommended For Optimal Remote Reservoir Positioning And Fitment

RM19-002

Availability

R
P.O.A.

Only For Use With MR19-50092

Upper Control Arm
 

(Pair) 3º Castor Built In
Rubber Bushes
Ball Joint Not Included

UCA19-004K

Availability

R
P.O.A.

Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment

Rear QTY Part
Number
Price
Shock Absorber

Twin Tube Gas
Heavy Duty

GS19-081T

Availability

R
P.O.A.

Internal Monotube
Heavy Duty

IMS19-50081T

Availability

R
P.O.A.

Monotube Remote Reservoir
Heavy Duty

MR19-50081T

Availability

R
P.O.A.
U-Bolt Kit

Kit Contains:
2 x UB21-466

UB21-466K

Availability

R
P.O.A.
Shackle Bush Kit

Kit Contains:
2 x PB19-1523
4 x PB19-1524
4 x PB19-1525

PB19-1104K

Availability

R
P.O.A.
Pin

Greasable: Fit in Pairs

SP59-060

Availability

R
P.O.A.
Tailshaft Spacer Kit
 

Tailshaft Centre Bearing Spacer Kit

WA19-526K

Availability

R
P.O.A.

Helps to Reduce Driveline Vibration in Lifted Vehicles

Shackle

Greasable: Fit in Pairs

SK19-058

Availability

R
P.O.A.
Leaf Spring

3 + 1 Leaves (Parabolic)
Raised Height (60mm Lift)

L19-135-RP

Availability

R
P.O.A.

3 + 1 Leaves (Parabolic)
Raised Height (3” Lift)

L19-139-RP

Availability

R
P.O.A.