5th Generation - GRN285
4.0L V6 Petrol,
|WARNING - 75MM (3”) OR HIGHER LIFT|
|The suspension components listed on this page are for off-road use only.|
|The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.|
|Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.|
|These products do not come with any warranty or guarantee.|
Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.
Below Coil Springs Suit GS59-574 Shock Absorber
The Below Coil Springs Will Provide Approximately 3” Lift When Fitted With Suitable Long Travel Shock Absorbers With Original Spring Seat Height.
Spring Seat 12mm Higher Than OE
Must Fit When Using Long Travel Shock Absorbers GS59-574 To Prevent C.V. Bind
Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment
Vehicles With a 3rd Row Seat Will Lift 5mm Less
GS59-575 Only Suits Long Travel Coils
Designed For More Articulation
Upper Trailing Arm
Lower Trailing Arm