4x4
Toyota
TOY-113
Type:

Hilux

Model:

Vigo - KUN/GGN 25/26, KZN 35/36

Year:

2005 to Mid 2015

Detail:

4x4 Single Cab, Extra Cab, Dual Cab, 
75mm (3” Lift)

WARNING - 75MM (3”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
  • Refer to Local Laws before Fitting to Registered/Road Vehicles
  • An Engineering Certificate may be required
  • Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
 
  • Adjustable Panhard Rods
  • Modified Leading / Trailing Arms
  • Brake Hoses
  • Extended Bump Stops
  • Gear Box & Drive Line Modifications
  • Steering Arms
  • Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only
Front QTY Part
Number
Price
Coil Spring


Linear Rate
Raised Height (3" Lift)

C59-354

Availability

R
P.O.A.

Linear Rate
Raised Height (3" Lift)
80-100Kg

C59-318

Availability

R
P.O.A.
Shock Absorber

IFP Monotube Shock
Adjustable Spring Seat Height
X = 226mm / 8.9"

IMS59-50220C

Availability

R
P.O.A.

X - Centre of Eye to Spring Seat

Monotube Remote Reservoir
(3-Way Adjustable)
Adjustable Spring Seat Height
X = 226mm / 8.89"

MRA59-A220C

Availability

R
P.O.A.

X - Centre of Eye to Spring Seat

Please Note That the Diff Drop Kit DD59-527K Must be Fitted When Using The Shock Absorber MR59-50220

Bump Stop
 

Replacement Bump Stop
Progressive Adjustable 0-30mm Extension

BS59-560

Availability

R
P.O.A.

Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.

Control Arm

Upper Control Arm

(Pair) 3º Castor Built In
Rubber Bushes
with Ball Joint

UCA59-003K

Availability

R
P.O.A.

Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment

Strut Top Cap

Strut Top Cap

SC59-001

Availability

R
P.O.A.
Diff Drop Kit
 

Diff Drop Kit

DD59-538K

Availability

R
P.O.A.

Must Fit When Using Long Travel Shock Absorbers IMS59-50220C & MRA59-A220C To Prevent C.V. Bind.
Must Also Fit CV59-554K & CV59-557K.

C.V. Boot

Outer C.V. Boot

 

High Clearance Outer C.V. Boot Kit

CV59-554K

Availability

R
P.O.A.

Must Be Fitted For Lifts Over 50mm To Reduce C.V. Boot Wear.
Can Also Be Used As Genuine Replacement

Inner C.V. Boot

 

High Clearance Inner C.V. Boot Kit

CV59-557K

Availability

R
P.O.A.

Must Be Fitted For Lifts Over 50mm To Reduce C.V. Boot Wear.
Can Also Be Used As Genuine Replacement

Swaybar Relocation Kit
 

Sway Bar Relocation Kit

SE59-524K

Availability

R
P.O.A.
Rear QTY Part
Number
Price
Leaf Spring

It is a Requirement that the Brake Adjuster BA59-002 be Fitted When Using These Leaf Springs

3 + 1 Leaves
Raised Height (50mm Lift)
Medium Duty
Up to 100Kg Constant Load

L59-047-RP

Availability

R
P.O.A.

L59-047-RP Lifts Only 50mm to Provide a More Level Look

3 + 1 Leaves
Raised Height (75mm Lift)
Medium Duty
Up to 100Kg Constant Load

L59-049-RP

Availability

R
P.O.A.
Shock Absorber

Twin Tube Nitro-Gas
(Big Bore)

GS59-651

Availability

R
P.O.A.

IFP Monotube Shock

IMS59-50649

Availability

R
P.O.A.

Monotube Remote Reservoir
(3-Way Adjustable)

MRA59-A649

Availability

R
P.O.A.
Spring & Shackle Bush Kit

Kit Contains:
2 x PB59-1503 (F)
4 x PB59-1501 (R)
4 x PB59-1502 (C)

PB59-1094K

Availability

R
P.O.A.
U-Bolt Kit

Kit Contains:
2 x UB59-437

UB59-437K

Availability

R
P.O.A.
Shackle Kit

Greasable: Fit in Pairs

SK59-053

Availability

R
P.O.A.
Shackle Pin

Greasable: Fit in Pairs

SP59-060

Availability

R
P.O.A.
Brake Adjuster
 

Recommended when Raising Vehicle

BA59-002

Availability

R
P.O.A.

Not Required For Vehicles With ABS Brake System