4x4
Toyota
TOY-121
Type:

Tacoma

Model:

3rd Generation (3" Lift)

Year:

2016 on

Detail:

Single Cab, Extra Cab, Dual Cab, 
4x4, 
2.7L i4, 3.5L V6, 
75mm (3” Lift)

WARNING - 75MM (3”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
  • Refer to Local Laws before Fitting to Registered/Road Vehicles
  • An Engineering Certificate may be required
  • Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
 
  • Adjustable Panhard Rods
  • Modified Leading / Trailing Arms
  • Brake Hoses
  • Extended Bump Stops
  • Gear Box & Drive Line Modifications
  • Steering Arms
  • Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only
Front QTY Part
Number
Price
Coil Spring

Dual Cab



Linear Rate
Raised Height (75mm Lift)
Comfort Option - Reduced Rate

C59-448

Availability

R
P.O.A.

Linear Rate
Raised Height (75mm Lift)

C59-314

Availability

R
P.O.A.

Linear Rate
Raised Height (75mm Lift)
Heavy Duty
50-100Kg

C59-352

Availability

R
P.O.A.
Shock Absorber

It Is Recommended To Fit A Diff Drop & High Clearance C.V. Boots With These Long Travel Shocks

Twin Tube Nitro-Gas
(Long Travel)

GS59-220

Availability

R
P.O.A.

IFP Monotube Shock
Adjustable Spring Seat Height
X = 226mm / 8.9"

IMS59-50220

Availability

R
P.O.A.

X - Centre of Eye to Spring Seat

Monotube Remote Reservoir
(3-Way Adjustable)
Adjustable Spring Seat Height
X = 226mm / 8.9"

MRA59-A220

Availability

R
P.O.A.

X - Centre of Eye to Spring Seat

Includes Vehicle Specific Bracket.
If Vehicle Specific Bracket Does Not Work, Use RM80-005 Universal Bracket

Bump Stop
 

Replacement Bump Stop
Progressive Adjustable 0-25mm Extension

BS59-560

Availability

R
P.O.A.

Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.

Control Arm

Upper Control Arm

(Pair) 3º Castor Built In
Rubber Bushes
with Ball Joint

UCA59-003K

Availability

R
P.O.A.

Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment

Strut Top Cap

Strut Top Cap

SC59-001

Availability

R
P.O.A.
Diff Drop Kit
 

Diff Drop Kit

DD59-527K

Availability

R
P.O.A.

Must Fit When Using Long Travel Shock Absorbers GS59-220, IMS59-50220 & MR59-50220 To Prevent C.V. Bind

Rear QTY Part
Number
Price
Leaf Spring

3 + 2 Leaves
Raised Height (55mm Lift)
Medium Duty
Up to 100Kg Constant Load

L59-110-R

Availability

R
P.O.A.

4 + 2 Leaves
Raised Height (55mm Lift)
Heavy Duty
280Kg Constant Load

L59-111-R

Availability

R
P.O.A.

5 + 2 Leaves
Raised Height (55mm Lift)
400-550Kg Constant Load

L59-112-R

Availability

R
P.O.A.
Shock Absorber

Twin Tube Nitro-Gas

GS59-940

Availability

R
P.O.A.

Monotube Remote Reservoir
(3-Way Adjustable)

MRA59-A940

Availability

R
P.O.A.
Spring & Shackle Bush Kit

Kit Contains:
6 x PB59-1503 (F, R, C)

PB59-1101K

Availability

R
P.O.A.
U-Bolt Kit

Kit Contains:
2 x UB59-453-2

UB59-453-2K

Availability

R
P.O.A.
Shackle Pin

Greasable: Fit in Pairs

SP59-060

Availability

R
P.O.A.